Everything you need to know about WiMAX

Opnet v14.0.A problem

hi
Is there anybody has a successfull installation with Opnet v.14.0.A

I installed Visual studio 2005 and set environment variable for it. I do all thing that have been explained in this site :
http://www.alivenotdead.com/wychina_007/Installing-OPNET-14-0-profi...

and changes in Edit=>Preference for repositories that explained in this site :
http://groups.google.com/group/OPNET/browse_thread/thread/d62892258...

but I have this error :

<<< Recoverable Error >>>
Object repository construction failed
due to errors encountered by the binder program (bind_so_msvc)
T (0), EV (-), MOD (NONE), PROC (sim_load_repos_rebuild)
----
Errors reported by the binder program follow
(these messages have been saved in (C:\Users\Reza\op_admin\tmp\bind_err_5920):
LINK : fatal error LNK1181: cannot open input file 'C:\Program.obj'
----
<<< Program Abort >>>
Error encountered rebuilding repository -- unable to proceed
T (0), EV (-), MOD (NONE), PROC (sim_load_repos_load)

problem related to linker but I don't really how to solve it ???
I also changed Processor statues to optimized and ... in DES set enviroment.

I test it in XP-SP3 and vista-SP1
I used Licenece modeler 14.5 for license.

u can find RS link for download from here for version 14.0A_PL3:

http://rapidshare.com/files/195294018/dlmr.zip
http://rapidshare.com/files/195479949/dlmr.z01
http://rapidshare.com/files/195515288/dlmr.z02
http://rapidshare.com/files/195619398/dlmr.z03
and
OPNET.Modeler.14.5.License.Maker-FFS.exe :

http://rapidshare.com/files/153189284/ffskgopnet145.rar

I know I can use IT GURU for free from site but i need modeler and this version not v11.5 beacause mobile WiMAX module.

thanx great

▶ Reply to This

Replies to This Discussion

Permalink Reply by Sergio on May 17, 2009 at 8:52pm: uhhhh I do not know this problem, but did you try to install visual studio 2003 or (6th version)?
I have modeler 14 running with visual studio 6 and no problems.

Regards; ▶ Reply to This

Permalink Reply by reza_h on May 18, 2009 at 3:55am: Thanx Dear Sergio
It's good news that you have successful installation.I don't test visual 6.0 or 2003.
Is it necessary to set environment variables in 2003 or v6.0? Is it have special installation instruction?
thanx again; ▶ Reply to This

Permalink Reply by Sergio on May 18, 2009 at 10:33pm: Hi Reza,

Nop, it is not neccessary to set any environment variables in VS 2003, I just installed it before Opnet Modeler and now it's working nice.

regards; ▶ Reply to This

Permalink Reply by reza_h on May 19, 2009 at 1:31pm: thanx really useful.
I'm going to test it.

thanx dear sergio; ▶ Reply to This

Permalink Reply by reza_h on May 25, 2009 at 5:35am: i really don't know what i do ?
i test it with 2003 and it needed to set environment variables.
after set it problems for DES analysis exists yet.
but thanx for your time sergio; ▶ Reply to This

Permalink Reply by Sergio on May 25, 2009 at 7:06pm: Hi Reza

I just do not know your problem, I'm not an expert at Opnet, I'd like to help you with your problem. First I installed Visual Studio 2003, then Opnet, and no problems were found in my installation process. I did not set any environment variables.

What I can recommed you is to uninstall the Visual Studio 2003 and Opnet Modeler with Your Uninstaller then run Tune-Up Utilities or Registry Mechanic or CCleaner so you can clean your registry up, the you reinstall the Visual Studio 2003 first of all, then the Opnet Modeler.

Regards.

Sergio Racini; ▶ Reply to This

Permalink Reply by reza_h on May 26, 2009 at 1:59am: thanx dear Sergio
I think u don't have simulation with Opnet. when u want to make DES analysis this error appear.
but really thanx for your time and answer
good luck; ▶ Reply to This

Permalink Reply by reza_h on September 17, 2009 at 1:53pm: Dear Sergio
I can finally do it.
you can download my installation guide from here :

http://rapidshare.com/files/281438374/how_install_opnet_14_in_vista...; ▶ Reply to This

Permalink Reply by marb3 on January 20, 2010 at 2:38pm: does this version run with visual studio 2008?

regards,; ▶ Reply to This

Permalink Reply by reza_h on January 20, 2010 at 2:56pm: Dear marb3

when i want to use visual 2008 i face with so many problem, i think it need more configuration setting but i don't know how.

if u can install successfully let me know.
have a nice time; ▶ Reply to This

Opnet v14.0.A problem

Replies to This Discussion

WiMAX360 Guidelines

Badge