wimax radio engineering

Comment

Comment by Md. Mahfuz Islam on March 10, 2010 at 1:57am

hi friend
share your knoledge for upgrate more technology
my email abon_june2007@yahoo.com or mahfuz@fakirgroup.com
Thanking you,

Comment by Ronak on February 22, 2010 at 6:33am

Hi everybody
Does anyone know how I can define a 6-tap multipath rayleigh fading channel in OPNET?

Comment by Ronak on February 9, 2010 at 1:00pm

Hi, I run one of the "wimax examples" of OPNET, Does anyone know about this errors?

Beginning simulation of WiMAX-cochnl_same_perm_7x1 at 23:16:06 Mon Feb 08 2010
----
Kernel: development (not optimized), sequential, 32-bit address space
----
<<< Recoverable Error >>>
Object repository construction failed
due to errors encountered by the binder program (bind_so_msvc)
T (0), EV (-), MOD (NONE), PROC (sim_load_repos_rebuild)
----
Errors reported by the binder program follow
(these messages have been saved in (D:\Documents and Settings\VAIO-\op_admin\tmp\bind_err_2508):
Creating library D:\Program Files\OPNET\14.5.A\models\std\example_networks\WiMAX-cochnl_same_perm_7x1.dev32.i0.nt.lib and object D:\Program Files\OPNET\14.5.A\models\std\example_networks\WiMAX-cochnl_same_perm_7x1.dev32.i0.nt.exp

wimax_attribute_definer.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_burst_profile_order

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_mac_addr_from_module_objid_find

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_flow_information_bits_stat_update

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bs_bw_req_requirements_bytes_decrease

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_bs_control_sched_be_serv_q_access_by_index

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bs_bw_req_requirements_bytes_increase

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bs_bw_req_requirements_bytes_get

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_compute_mac_and_phy_overhead

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_bs_control_sched_be_service_q_destroy

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_ie_cleanup

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_ie_cleanup

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_ss_info_get_from_svf

wimax_bs_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_harq_phy_info_process

wimax_mac.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_be_bw_request_sched_create

wimax_mac.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_access_service_net_ip_addr_str_process

wimax_mac.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bw_req_request_requirements_by_cid_pk_get

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bw_req_request_requirements_by_cid_pk_get

wimax_mac.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bw_req_conn_total_requirements_get

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bw_req_conn_total_requirements_get

wimax_mac.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bw_req_grant_conceded_update

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bw_req_queue_elem_destroy

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_be_bw_req_next_cid

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_be_bw_requirements_not_empty

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_cdma_bwr_ready_for_tx

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bw_req_queue_elem_create

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bcid_flow_update

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_demux_list_remove

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_mux_list_remove

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_to_demux_conn_update

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_conn_classifier_update

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_to_mux_conn_update

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_bw_req_queue_elem_destroy_void

wimax_ss_control.dev32.i0.pr.obj : error LNK2001: unresolved external symbol _wimax_support_cdma_bwr_list_elem_destroy

wimax_amc_support.dev32.i0.ex.obj : error LNK2001: unresolved external symbol _wimax_support_flows_information_bits_stat_update

wimax_mobility_support.dev32.i0.ex.obj : error LNK2001: unresolved external symbol _wimax_support_target_list_copy_proc

wimax_mobility_support.dev32.i0.ex.obj : error LNK2001: unresolved external symbol _wimax_support_target_list_dealloc_proc

wimax_phy_support.dev32.i0.ex.obj : error LNK2001: unresolved external symbol _wimax_support_notification_state_get

D:\Program Files\OPNET\14.5.A\models\std\example_networks\WiMAX-cochnl_same_perm_7x1.dev32.i0.nt.dll : fatal error LNK1120: 34 unresolved externals


----
<<< Program Abort >>>
Error encountered rebuilding repository -- unable to proceed
T (0), EV (-), MOD (NONE), PROC (sim_load_repos_load)

----


Thanks alot

Comment by Martin Mueller on December 3, 2009 at 5:07am

test and measurement for WiMAX is critical especially with MIMO functionality and Fading. Rohde & Schwarz provides solutions. And we are interested to hear your requirements.

Comment by Aurelio S. Montefalco on November 4, 2009 at 2:58pm

denial of service is rejected when base station is full and no available IP address in the modem. have you ever try to increase the height of the CPE or check on the BS manager software regarding about the UL/DL signal levels? is there any obstruction on the LOS? check also the network modem it must be 10/100 fast ethernet or gigabit ethernet.

Comment by Mohamed Hassan on November 3, 2009 at 5:03am

I was able to bring link by realigning it to another base station.

Currently am researching on Denial Of service on 802.16,specifically on the mac layer.

Comment by Aurelio S. Montefalco on November 3, 2009 at 3:05am

mohammad hassan:
remove the proxy server in the LAN settings which causing the LAN card confuse in selecting IP address and was not be able to open any web page also, remove all the IP's and DNS server address in the Internet Protocol (TCP/IP). remember that there is different IP from the CPE.

Comment by Andi on October 9, 2009 at 9:37am

to Hassan:
have you try setting up proxy server? is your network ad hoc or what?
well, ping is a ipx command in which you use it to check whether physical connection / logical connection to destination host available or not.
hope be any of help.

Comment by Mohamed Hassan on October 8, 2009 at 10:37am

Hi i am experiencing a very strange problem on one of my clients on Wimax.
The client is able to ping,traceroute but is unable to open any web pages.

Comment by Vanderlei Almagro on October 4, 2009 at 7:19pm

Hi Friends...
I´m a Brasilian CASS-Cerified Alvarion System Specialist and find new oportunities
Tks

• ‹ Previous
• 1
• 2
• 3
• …
• 5
• Next ›
• Page